Pages

Wednesday, July 24, 2013

Depot Project - Habitat for Humanity


Depot Project RFP Deadline August 1st

Habitat for Humanity has announced that prints of the Depot Project are now available.  To obtain a copy, contractors must call Traverse Repro at 947-6284.  The deadline for the RFP is August 1st.

For more general information, contact Stephanie at Habitat at 941-4663 x124.


Thursday, June 27, 2013

Three Steps That Could Save Builders $42,000 per Home


The residential construction industry is facing building code proposals that could significantly impact the design and cost of new homes and directly harm every builder’s and remodeler’s ability to complete a quality project at an affordable cost.

Participation in the complex codes development process is one of the most important ways that NAHB provides value to members. At recent International Code Council (ICC) code development hearings, the association was successful in helping defeat many proposals that would add greatly to the cost of building single-family homes and apartments as well as the cost of remodeling projects.

If NAHB is ultimately successful on all 750 code change proposals that the association took a position on, the overall cost savings could be more than $42,000 per home.

One of the proposals struck down in the initial round of hearings would mandate a second set of stairs in larger homes. Another would have required all homes and townhouses to be accessible, including homes in flood and coastal areas where it is impossible to meet the requirements without the installation of a wheelchair lift or elevator.

These and more than 2,000 other proposed code changes could increase the cost of building even the most modest home by tens of thousands of dollars.

ICC is working on the 2015 International Energy Conservation Code, International Residential Code, International Fire Code, International Existing Building Code and the International Property Maintenance Code.

The ICC Committee Action Hearings were held in Dallas in late April. At the conclusion of the preliminary hearings, NAHB was successful on 596 of the 750 code change proposals that it either supported or opposed.

However, these aren't the final results. The last and most important phase of the code development process occurs this fall at the ICC Final Action Hearings in Atlantic City, N.J. on Oct. 2-10. The code officials who attend these hearings will cast the votes that will decide the final outcome on all 2,065 proposed code changes.

Three Steps to Lock in Savings

To ensure that NAHB’s success in the preliminary hearings translates to the same results in the Final Action hearings this fall, it is absolutely vital for builders and remodelers to get involved in the process early and to fight hard by taking the following actions:

Meet with your state and local code officials and elected officials to gain their support. Make sure they understand the issues, and help them see why they should vote in favor of the home building industry’s key proposals.

For example, four of the most critical code change proposals are related to energy efficiency and would allow equipment and performance trade-offs if passed. Approval of just these four code change proposals could save more than $4,000 per home.

Get your local HBA involved and let them know that this is a top priority for the residential construction industry.

Ask your elected officials to allow their code officials to attend the ICC Final Action Hearings in Atlantic City, N.J. so they can vote in support of NAHB’s positions. Remember, this year, code officials must still be present in Atlantic City to vote during the Final Action Hearings.

Resources You Need

NAHB has the tools and resources necessary to help builders, remodelers and state and local HBAs to effectively engage their local and state government and industry leaders. NAHB is calling on all members to take these action steps to help ensure that only those code changes that are necessary, practical, and cost effective will be approved during the ICC Final Action Hearings.

Calling All Code Experts

NAHB is looking for HBA member code experts as the association tries to ensure that the International Code Council’s (ICC) model building codes include only provisions that benefit home buyers’ health and safety or have reasonable payback periods. Some of the proposed code changes related to energy conservation provide very little benefit if any and have payback periods ranging from 15 to 40 years. If you can help, please contact your EO.

In addition, please visit nahb.org/2015codes, click on your state and email Steve Orlowski with the email address and phone number for the code officials identified within your state or jurisdiction. NAHB has their names, but not their contact information, so your assistance is crucial in this regard.
 

No Time to Look Backward—What Are HBA Michigan’s Top Priorities Here and Now?

 
On the heels of what many of our longtime members tell me is the state association’s most successful year ever—in terms of advocacy and reforming tax and regulatory policies impacting the building industry, I’m often asked how HBA Michigan is following-up on the banner year of 2012. My response: (1)by being diligent in sustaining recent legislative and regulatory victories; (2) identifying strategies and solutions to a looming building industry worker shortage; (3) staying on offense for additional reforms that encourage more housing investment across the state; and (4) supporting local HBA membership growth to strengthen our voice as an industry.

Diligence: last year your state association was successful in eliminating 18 mils of taxation on inventory homes. Now some are suggesting that this change only reduces the tax on the building structure itself (not the property). Needless-to-say, your state association is working behind the scenes to ensure that this "interpretation" not take root. Similarly, last year your state association ushered in a historic set of changes to development rules for construction in and around our state’s critical dunes. Some are now trying to circumvent these changes thru administrative channels. Your state association is on guard and has interceded in several instances to make sure bureaucrats don’t disregard the new rules. Last year your state association was also able to get a new law passed that moves our state to a new flex-code cycle, so that code changes only have to occur once every 6 years instead of every 3. But, this new cycle only begins after this year’s revision to the state uniform construction code. So, your state association and a dedicated committee of builders from around the state are working to ensure that this year’s changes only include those that are absolutely necessary and justified.

Worker Shortage: this year we are supporting legislation (HB 4465 & HB 4466) that will allow curriculum flexibility enabling more kids to enter construction voc ed programs around the state. The large majority of kids interested in such programs are turned away. Why, because scheduling and availability of language and Algebra II courses would make it impossible for them to graduate on time if they entered the construction program. We believe parents ought to have the flexibility to get their children into these hands on programs (and still be able to graduate). We’re also working with the Construction Teacher’s Association, your local association, and others to try and develop better networks and communication strategies to connect potential workers with builders, remodelers and contractors. Some members may not yet see shortages in their areas, but they are coming. Too many workers were lost in our industry during the downturn (some 70,000 jobs were lost). Even modest growth has begun to trigger shortages.

Staying on Offense: much like the changes to our State’s rules for development in critical dunes that were passed into law last year, this year we are seeking to reform Michigan’s wetlands law to avoid turning wetland permits over to the EPA and the Army Corp. Additionally, bills will soon be introduced to allow more flexible options for new septic systems. We also have bills in the works to make sure taxable values don’t spike when homes are rebuilt after a fire or other tragedy; and to eliminate the 18 mils of property taxes on any remaining inventory homes built before last year’s change went into effect. And, we are supporting legislation that would allow the Michigan State Housing Development Authority provide gap financing for development, since no (or few) private lenders are financing inventory homes or developments.

Not only does HBA Michigan work on a daily basis in the legislative, regulatory and judicial arenas, we have to be involved in the political arena. Friends-of-Housing (FOH) is your association’s political action

committee and voice in the election process. While the 2014 elections seem a ways off the work for success in those elections is already underway. This means raising money. FOH will be involved (in one way or another) with almost every race on the ballot. From the Governor’s race on down to the 38 state senate seats that will be on the ballot to the 110 state representative races taking place around the state…to three Supreme Court seats. We can’t sit on the sidelines in the political arena if we want to continue to see successes in the legislative, legal and regulatory worlds. So, next time you’re asked to lend your financial support to Friends of Housing, please remember this reality and contribute.

Membership Growth: HBA Michigan cannot be successful without strong local HBAs. Your state association is investing in one-on-one membership recruitment and retention training for local HBA E.O.s’ this year. Nearly a dozen have already signed up for this training. Your state association is also working to expand and improve member-only benefits and discounts. A copyright infringement insurance program has been developed (and no other such coverage can be obtained unless you’re a member). We’ve also started offering a new telemedicine service among others. These along with our long-valued Meijer, Speedway, Frankenmuth and other programs provide an important tool for locals to retain and grow their membership.

Bottom line: HBA Michigan is the only statewide organization dedicated to promoting and protecting the interests of the residential building industry. If you are in the industry and are reading this, but aren’t a member of an HBA, I hope you conclude that you need to be. For members, please know we’re always just a phone call away. Don’t ever hesitate calling me directly if you have a question or need assistance. My number is 517-646-2555.

Wednesday, June 19, 2013

MIOSHA Hazard Alert - Nail Guns



MIOSHA Hazard Alert
Construction Safety & Health Division
Dangers of Pneumatic Nail Guns With Contact Trip Triggers
 
In February 2013, MIOSHA investigated a fatality that occurred at a residential jobsite where a carpenter was framing a wall and ended up shooting himself in the face with a 3 inch nail from a pneumatic nail gun.  The carpenter was in an awkward position and using his non-dominant hand to operate the nail gun.  The gun appeared to have “double fired” which knocked the carpenter off balance.  The tip of the nail gun contacted his face near the eye area and another nail fired into his head which lodged in his brain.  The victim was not wearing eye protection or head protection which may have prevented the nail from entering the victim’s face.   

Pneumatic nail gun injuries are very common in the residential construction industry; responsible for nearly 40,000 visits to emergency room each year.  Most nail gun injuries occur when the gun is equipped with a contact tip trigger. Contact tip triggers allow the gun to discharge a nail anytime the gun’s nose piece and the trigger are pressed.  The user can hold the trigger down and bump fire the gun repeatedly by simply pushing down on the nose piece.  Carpenters prefer using contact tip triggers because they are faster.  However, these types of triggers also make it much easier for the operator to accidently shoot themselves or anyone standing close by if the nose piece bumps up against someone or something when the trigger is depressed.  Injuries often occur when climbing up and down ladders while having your finger on the trigger.

Nail guns with contact tip triggers are also susceptible to double firing which is the firing of a second unwanted nail that can ricochet off the first nail which can strike and injure anyone working in the proximity. 

Full sequential triggers are safer!  They force the operator to make two positive actions to fire the nail gun each and every time a nail is fired. The full sequential trigger will only fire a nail when the controls are activated in a certain order.  First, the safety contact tip must be pushed into the work piece and then the operator squeezes the trigger to discharge a nail.  Both the safety contact tip and the trigger must be released and activated again to fire a second nail.  The operator cannot hold the trigger down and bump fire the nail gun.  This greatly reduces the amount of unwanted “double fires” of nails.

Most new pneumatic nail guns come equipped with the full sequential trigger.  A contact trip trigger is a separate attachment that can replace the full sequential trigger.  Employees must know and follow the safety guidelines provided by the manufacturers of nail guns and wear the appropriate personal protective equipment to prevent injuries.

General Safety Guidelines for Pneumatic Nail Guns

         Review the owner’s manual carefully with all operators.

         Observe each employee demonstrating safe operating procedures.

         Always wear safety glasses and a hard hat!

         Do not touch the trigger unless firing the tool against a work piece.

         Use extreme caution when using an air tool around other workers.

         Never point the tool at anyone. Treat the tool like a firearm and assume it is loaded.

         Disconnect the air hose before clearing a jam or making adjustments.

         Use manufacturer’s specified pressures for the tool.

         Keep your free hand safely out of the way of the tool.

       •          Secure the hose when working on scaffolding to prevent the tool from falling.


For Additional Information

The National Institute for Occupational Safety and Health (NIOSH) and the Occupational Safety and Health Administration (OSHA) issued a publication titled, “Nail Gun Safety: A Guide for Construction Contractors” to help alert and provide training to avoid hazards when using nail guns. Go to

For additional training and assistance contact the Consultation Education and Training Division at www.michigan.gov/mioshacet or call 517-322-1809. 
 

Wednesday, June 12, 2013

Wednesday, April 24, 2013

The 13th Michigan worker death of 2013


The 13th Michigan worker death of 2013 occurred at approximately 1:30 pm on April 22, 2013. Employers and employees are urged to use extreme care and safety diligence in all work activities.

Summary of incident: On April 22, 2013 at approximately 1:30 pm, an explosion occurred in the digester at a waste water treatment plant. Construction employees were working on or near a tank using a welder’s torch.

Last year there were 26 MIOSHA-related deaths. 2009 saw the lowest number with 24.

If you need help or assistance in ensuring your workplace is safe, MIOSHA is here with resources to help. The Consultation Education & Training (CET) Division provides workplace safety and health training and consultations to employers and employees throughout Michigan free of charge. Contact CET today at (800) 866-4674 or submit a request online at www.michigan.gov/cetrca.

Every life is precious. Our mutual goal must be that every employee goes home at the end of their shift every day!


Fatality Number
Date
Occupation
Age
Type of Injury
Description
Location (City)
1.
1/17/13
Assistant Manager
36
Crush
Employee was run over by a tractor while trying to remove a railroad timber using a tractor loader with a front bucket.
Turner
2.
1/18/13
Materials Handler
42
Crush
Employee was operating a crane and was crushed by beams that fell out of the sling being carried by the crane.
Belleville
3.
1/23/13
Carpenter
20
Fall
Employee fell approximately 19’ from a high-pitch residential roof while installing shingles.
Coldwater
4.
1/24/13-accident
1/28/13-passed away
Laborer
56
Cave-in
Employee was working in a 12’ deep excavation to repair a leaking water main when a section of the side collapsed, completely burying him. Coworkers uncovered him and he was taken to medical facilities, where he later expired.
Grosse Isle
5.
2/06/13
Bus Operator
48
Run over
Employee dropped off last fare and stepped out of bus. Bus began to roll. She attempted to re-enter the bus and was run over by the rear tires.
Mt. Morris
6.
2/18/13
Roofer
39
Fall
Employee was installing insulation material on a low-pitch roof for a new commercial building. He was working between the warning line system and the edge of the roof when he fell 25 feet to the ground.
Howell
7.
2/16 /13-accident
2/20/13-passed away
Carpenter
33
Struck
Employee was struck in the eye by nail from pneumatic nail gun while rough framing a house. Nail entered through eye socket into the brain.
White Lake
8.
2/25/13
Roofer
36
Fall
Employee fell 22 feet through a deteriorated roof while in the process of replacing the metal decking.
Grand Blanc
 
9.
3/17/13
Welder
61
Struck
Employee was welding a piece of equipment over a pulper and fell into the pulper. The pulper is an open top vat with a spinning rotor blade at the bottom.
White Pigeon
10.
3/21/13
Carpenter
48
Fall
Employee fell 35 feet when a gust of wind pushed the employee and a window he was installing off the platform of a forklift.
Franklin
11.
3/21/13
Die Setter
42
Struck
Employee had a mold hooked on a crane when the bolt gave way causing the mold to fall, bounce and hit another mold. The employee was between the two molds and struck.
Shelby Township
12.
4/11/13
Co-Owner
59
Crush
The co-owner was trying to re-stake a large spruce tree that had fallen over. He used the bucket on his skidster to help. He was standing on the ground beside his cab and apparently leaned into the cab and accidently activated the bucket controls. His head was crushed between the bucket lifting arms and the cab.
Emmett
13.
4/22/13
 
Pipefitter
49
Explosion
An explosion occurred in the digester at a waste water treatment plant. Construction employees were working on or near a tank using a welder’s torch.
Dexter

Housing Juggernaut Seen Spurring 500,000 New U.S. Workers

Housing Juggernaut Seen Spurring 500,000 New U.S. Workers

Brett Gundlock/Bloomberg
 
A rebound in homebuilding after a six-year slump should generate as many as 500,000 jobs in 2013 and 700,000 in 2014 including related services.
Paul Laney landed a job two months ago as a home inspector in Woodstock, Georgia, as the city added staff to oversee a growing residential construction industry. “I am really ecstatic about it,” said Laney, 52, who closed his own contracting business in 2007.

Housing Juggernaut Seen Spurring 500,000 New U.S. Workers

Housing Juggernaut Seen Spurring 500,000 New U.S. Workers
David Paul Morris/Bloomberg
 
A rebound in homebuilding after a six-year slump should generate as many as 500,000 jobs in 2013 and 700,000 in 2014.

State-by-State Unemployment

State-by-State Unemployment
 

 
At a 19-home development being built by Windsong Properties off Main Street in Woodstock, about 30 miles north of Atlanta, people are being hired to sell homes, underwrite mortgages, install garage doors and security systems, and inspect finished construction.
A rebound in homebuilding after a six-year slump should generate as many as 500,000 jobs in 2013 and 700,000 in 2014 including related services, estimates Russell Price, a senior economist at Ameriprise Financial Inc. in Detroit and the top forecaster of employment for the past two years, according to data compiled by Bloomberg.
“Housing is like a coiled spring” driven by “a lot of pent-up demand,” said Glenn Hubbard, dean of Columbia University’s business school in New York, who was chairman of the White House Council of Economic Advisers under President George W. Bush. “It is a real source of strength in the economy -- from construction jobs and all the vendors who play into it.”
About half the jobs created by homebuilding are outside of construction, estimates the National Association of Home Builders, a Washington-based trade group. More than three jobs are created for each single-family home built, including related work, a 2008 study by the group estimates.

Huge Effect

“A revival in new home construction will have a huge stimulative effect on the larger economy,” said Brad Hunter, Palm Beach Gardens, Florida-based chief economist for housing research firm Metrostudy. “When home construction goes up, so does demand for furniture, tile, lumber, concrete, draperies, paint, and appliances of all sorts.”
Price gains on existing homes in markets led by Atlanta, Las Vegas, San Francisco, Phoenix, and Fort Myers, Florida, will benefit homebuilders, said brokerage firm Sterne Agee & Leach Inc. analyst Jay McCanless in Nashville, Tennessee. That will allow homebuilders to raise prices, and prompt some shoppers to look more closely at new rather than existing homes, McCanless said. He has a “buy” rating on builders D.R Horton Inc., Ryland Group Inc. (RYL) and Meritage Homes Corp. (MTH)

Housing Starts

Single-family housing starts are likely to rise 18 percent to 632,000 in 2013 from a year earlier, and by another 26 percent to 796,000 in 2014, forecasts Hunter. Single-family starts fell 75 percent from the 2005 peak of 1.7 million to 2011’s low of 430,600.
Construction companies added 18,000 workers last month after a 49,000 surge in February that was the biggest in almost six years, a Labor Department report April 5 showed. As payroll growth slowed in March to 88,000, the smallest gain in nine months, construction added jobs faster than the overall market.
Yet the increase in construction jobs so far has lagged new activity because workers have had their hours increased, said David Crowe, NAHB chief economist in Washington. Weekly hours have risen to an average of 36.8 the past year, the highest since December 2006.
“We have seen increasing hours, but there is a limit to that,” he said. “I’m expecting to see a more direct correlation between increases in housing starts and increases in construction employment.”

Fed Assessment

The Federal Reserve, which is been buying $40 billion a month in mortgage-backed securities and $45 billion in Treasury bonds to lower long-term interest rates, said last month that housing has “strengthened further.” In an El Reno, Oklahoma, speech April 4, Kansas City Fed President Esther George cited rising housing starts and said low inventories were contributing to more building.
While construction may account for about 5 percent of the U.S. economy, it has “a big impact on both total output and employment,” St. Louis Fed President James Bullard told reporters April 3.
In Woodstock, with a population of 24,000, permits have been issued for 64 new homes in the first quarter, up 45 percent from the same period in 2012 and more than double the number for that period in 2011, according to City Manager Jeff Moon.
New home construction rose to 678 in Cherokee County, which includes Woodstock, last year from about 400 a year the prior three years, according to Metrostudy. Developers added 248 new lots in the last quarter of 2012, “suggesting an expectation of continued growth in demand,” Hunter said.

New Permits

Among the new permits have been those for Windsong Properties’ Garden Street subdivision, where broker Beth Jones said all 19 homes are under contract. The homes, which sell for the “upper $200,000s,” are being marketed to people 55 and older and include a design that can be adapted, for example, for accessibility to wheelchairs.
“It’s a huge success, coming from a market where everything was slow,” she said. “The market has been beginning to shift.”
Jones, 55, who is paid on commission, says she had to “dip into savings” during the housing slump, and her income has doubled from the low. “It is certainly a relief.”
Windsong Properties in Woodstock has 10 full-time employees up from six in in 2006, said operations manager Carrie Roeger. The company contracts out most of the construction and other work. Fifty-four subcontractors with at least 62 workers have been used for the project, excluding transportation of materials, she said.

Increased Employment

International Marble Industries Inc. in Woodstock, which makes and installs bathroom vanity tops and shower bases and worked at Garden Street, has increased employment to 50 from 20 people in 2009. The company lost money from 2008 to the middle of 2011 amid a “gut-wrenching” decline in business, President Dirk De Vuyst said.
“We are optimistic that volume is picking up and there is pent-up demand,” he said.
Loud Security Systems of nearby Kennesaw, Georgia, which installs security and wires homes for electronics, has boosted staff to 42 employees from 22 at the end of 2011, owner John Loud said. The company may hire a few more people by year’s end, he said.
“All the new construction is very encouraging, a big plus for us,” he said.
Tim Smith, 32, was hired in February as operations manager for the Overhead Door Company of Atlanta, which installs garage doors. The position had been vacant for two years.

Hiring More

The company has hired 10 people in the last two months and “we need to hire more for growth that will happen by the end of the year.”
Laney, who was a general contractor in Cherokee and Cobb counties north of Atlanta, closed his former homebuilding business during the housing slump, cutting the jobs of five workers. “There wasn’t any new construction,” and remodeling “wasn’t profitable.”
After spending much of the past few years working with heating and air conditioning work, which fluctuated seasonally, he took the city job adding a fifth building inspector Feb. 25.
“I love to see the new construction,” he said. “A lot of the homes we are inspecting are already sold. I don’t think the market will be as wide open as it was once, but there will be a good steady increase. People still ultimately want a new home.”
To contact the reporters on this story: Steve Matthews in Atlanta at smatthews@bloomberg.net;
To contact the editor responsible for this story: Christopher Wellisz at cwellisz@bloomberg.net